Search results for " mechanical properties."
showing 10 items of 70 documents
Experimental Characterization of the Properties of Double-Lap Needled and Hybrid Joints of Carbon/Epoxy Composites
2015
The effect of through-thickness reinforcement by thin 1 mm steel needles (z-pins) on the static tensile strength of double-lap joints of a carbon/epoxy composite was investigated. Two types of joints—z-pinned and hybrid (including glued ones)—were considered. The joints were reinforced in the overlap region with 9, 25, or 36 z-pins. Comparing mechanical properties of the double-lap joints with the corresponding characteristics of their unpinned counterparts, the z-pins were found to be highly effective: the strength and stiffness of the pinned joints increased up to 300% and 280%, respectively. These improvements were due to a transition in the failure mechanism from debonding of the joint …
Numerical experimental analysis of hybrid double lap aluminum-CFRP joints
2015
Abstract Due to their reliability and ease of assembly, both the adhesively bonded and the mechanical joints are commonly used in different fields of modern industrial design and manufacturing, to joint composite materials or composites with metals. As it is well known, adhesively bonded joints are characterized by high stiffness and good fatigue life, although delamination phenomena localized near the free edges may limit their use, especially for applications where corrosive environments and/or moisture can lead to premature failure of the bonding. In these cases, a possible alternative is given by the well-known mechanical joints. On the contrary, these last joints (bolted, riveted) requ…
The effect of silica nanoparticles on the morphology, mechanical properties and thermal degradation kinetics of polycarbonate
2012
Abstract Polycarbonate/silica nanocomposites with different silica quantities were prepared by a melt compounding method. The effect of silica amount, in the range 1–5 wt.%, on the morphology, mechanical properties and thermal degradation kinetics of polycarbonate (PC) was investigated. Clusters of silica nanoparticles were well dispersed in the polycarbonate whose structure remained amorphous. NMR results showed intermolecular interactions involving the carbonyl groups of different polymeric chains which did not affect the intramolecular rotational motions. The presence of the lowest silica content showed a decrease in the storage and loss moduli below the glass transition temperature, pro…
Flax–Glass Fiber Reinforced Hybrid Composites Exposed to a Salt-Fog/Dry Cycle: A Simplified Approach to Predict Their Performance Recovery
2023
Despite natural fibers gaining significant attention in recent decades, their limited performance and poor durability under humid environments cannot allow them to fully replace their synthetic counterparts as reinforcement for structural composites. In such a context, this paper aims to investigate how exposure to a humid/dry cycle affects the mechanical response of epoxy laminates reinforced with flax and glass fibers. In particular, the main goal is to assess the performance evolution of a glass–flax hybridized stacking sequence in comparison with the full glass and flax fiber reinforced composites. To this end, the investigated composites were first exposed to salt-fog for 15 or 30 days…
Reprocessing of polyethyleneterephthalate and characterisation of monopolymer blends of virgin and recycled polymers
1997
Recycling of polyethyleneterephthalate (PET from bottles is considered by changing both reprocessing machines and the effect of humidity. The rheological and mechanical properties of this recycled material remain very close to that of the virgin material provided that a careful drying is carried out before any melt operation. The reprocessing has been carried out mainly in view of the use of this secondary material in blends with virgin PET-monopolymer or homopolymer blends. Indeed, this use is a common industrial practice to reuse plastic scraps. Most monopolymer blends show properties between those of the two components but in some cases lower than those expected on the basis of an additi…
Tailoring Electrospinning Fabrication for Scaffolds for Heart Valve Tissue Engineering
2010
Previous work in controlling mechanical properties of electrospun scaffolds has largely been limited to altering the orientation of the fibrous network by either large rotational velocity or by altering the electric field during fabrication. Our lab has previously developed a technique to analyze the complete microstructural topology of electrospun scaffolds and extract key descriptors. In this project, we translated the target mandrel at varying speeds along its rotational axis in order to modify the microarchitecture without altering the fiber orientation angle. Using the algorithm mentioned above, we determined that increasing the translation speed resulted in a decrease in fiber interse…
Multi-functional hindered amine light stabilizers-functionalized carbon nanotubes for advanced ultra-high molecular weight Polyethylene-based nanocom…
2015
Hindered Amine Light Stabilizer (HAS) molecules have been covalently linked on the outer surface of multi-walled carbon nanotubes (CNTs), and the so-obtained multi-functional fillers (HAS-f-CNTs) have been compounded with Ultra High Molecular Weight Polyethylene (UHMWPE) to get composite films. The success of the grafting reaction of the HAS molecules has been confirmed through spectroscopic and thermo-gravimetric analyses. Morphological analyses reveal a segregated microstructure, in which CNT-rich channels surround the polymer domains. This morphology results in improved mechanical properties and appreciable electrical conductive features. More importantly, the addition of only 1 wt.% of …
Effects of ligand binding on the mechanical properties of ankyrin repeat protein gankyrin.
2012
Ankyrin repeat proteins are elastic materials that unfold and refold sequentially, repeat by repeat, under force. Herein we use atomistic molecular dynamics to compare the mechanical properties of the 7-ankyrin-repeat oncoprotein Gankyrin in isolation and in complex with its binding partner S6-C. We show that the bound S6-C greatly increases the resistance of Gankyrin to mechanical stress. The effect is specific to those repeats of Gankyrin directly in contact with S6-C, and the mechanical ‘hot spots’ of the interaction map to the same repeats as the thermodynamic hot spots. A consequence of stepwise nature of unfolding and the localized nature of ligand binding is that it impacts on all as…
Processing and Properties of Biopolymer/Polyhydroxyalkanoates Blends
2011
In this paper, the processability and the performance of a biodegradable polymer, Mater-Bi, and of its blends with either a sample of poly (hydroxy alkanoates) (PHA) or with bacterial biomass containing PHAs were compared. Adding PHA or directly the biomass containing it allows improving the processability of the matrix. Moreover, the mechanical behaviour of the systems was compared considering two different preparation methods, namely compression and injection moulding. The injection moulded samples show poorer mechanical performances than those of the compression moulded systems. The impact strength significantly improves when PHA is added while it reduces when bacterial biomass is used i…
Nanocarbons in electrospun polymeric nanomats for tissue engineering: A review
2017
Electrospinning is a versatile process technology, exploited for the production of fibers with varying diameters, ranging from nano- to micro-scale, particularly useful for a wide range of applications. Among these, tissue engineering is particularly relevant to this technology since electrospun fibers offer topological structure features similar to the native extracellular matrix, thus providing an excellent environment for the growth of cells and tissues. Recently, nanocarbons have been emerging as promising fillers for biopolymeric nanofibrous scaffolds. In fact, they offer interesting physicochemical properties due to their small size, large surface area, high electrical conductivity an…